Flocculants For Screw Press Dehydrator, What Are The Choices?

Aug 28, 2024Leave a message

The Auto polymer dosing system is the necessary equipment for sludge treatment, the sludge is added to the agent to flocculate the coagulum and then into the screw spindle for dehydration, the agent added by the screw machine is generally PAM, the also named polypropylene acyl rubber, the molecular weight of 1.5 million to 2 million, the concentration is generally 8%. The organic polymer flocculant can form a larger floc between the particles, resulting in a huge surface adsorption effect, and condensates the floating matter in the sewage into sulfone flowers. The ratio of dosing is often the key factor of dehydration, so the stack snail should choose the appropriate dosing system.


PAM dosing equipment is composed of dry powder dosing device, three dissolving tank, agitator, metering pump, liquid level meter, etc. The whole equipment uses three levels of mixing, so that PAM can fully contact with water and dissolve. The application of dosing equipment is relatively simple, the PAM is added to the thousand powder dosing device, after controlling the spiral tube of the dry powder dosing device, the amount of drug equipment, after three stages of full mixing, the metering pump is precisely added to the water body that needs to be dosed.


When the sewage and sludge are treated by the screw press dehydrator, some flocculants are often required to achieve a relatively good treatment effect. When choosing the right flocculant, we generally start from the following four aspects.
 

1. For sludge with high organic content, the more useful flocculant is cationic. The higher the organic content, the more cationic flocculant with higher polymerization degree should be selected. For inorganic sludge, anion can be considered.
2. The different properties of sludge directly affect the efficency effect, scum and remaining activated sludge are more difficult to dehydrate, and the dewatering function of mixed sludge is between the two.
3. Generally speaking, the more difficult to dehydrate the sludge, the larger the flocculation dose, the finer the sludge particles, which will lead to the addition of flocculant consumption, the high amount of organic matter in the sludge and the alkalinity, will also lead to the increase of the dosage of flocculant.
4. In addition, the solid content of sludge also affects the dosage of flocculant. Generally, the higher the solid content of sludge, the greater the dosage of flocculant when using sludge screw press dehydrator.
 

Classification of flocculants
Inorganic low molecular flocculant
Inorganic polymer flocculant
Simple inorganic polymer flocculant
Modified single cationic polymeric flocculant