Overview
Filter Housing is the core component of the fluid filtration system, mainly composed of three parts: housing, sealing assembly, and inlet and outlet interfaces. The housing provides physical support, the sealing assembly ensures fluid does not leak, and the interface realizes the connection between the system and the pipeline. It is widely used in chemical processes, water treatment, pharmaceutical purification, food and beverage processing, and other fields.
Features
Efficient maintenance design
Filter Housing adopts a quick-open clamp structure. The operator only needs to apply a 45° angle force to release the lock, and with the standardized filter element bracket, maintenance can be completed within 3 minutes. This modular design allows the same housing to adapt to 10-40-inch filter elements. Compared with traditional threaded housings, maintenance efficiency is significantly improved.
Good sealing performance
The sealing of the Filter Housing is guaranteed by a dual redundant system: the main seal uses a silicone rubber gasket, which generates a contact pressure of 8-12MPa when pressurized; the auxiliary sealing layer is a silicone-based liquid glue that fills microscopic pores. In continuous operation under a pressure difference of 8 bar, the leakage is less than 0.3mL, which solves the problem of easy aging of traditional single seals.
Material adaptability
Filter Housing provides differentiated material solutions for different working conditions.
• 316L stainless steel: Molybdenum content 2.5-3.5%, pitting resistance in chloride ion environment increased by 3-5 times, suitable for chemical solvent filtration.
• 304SS stainless steel: After electrochemical polishing (Ra＜0.4μm) with titanium nitride coating, the service life in the marine environment is extended to 8-10 years, meeting food and beverage hygiene standards.
Applications
Pre-filtration in the food and beverage industry
As a front-end barrier, Filter Housing intercepts impurities and microorganisms in raw materials through fine filter elements to ensure the safety of liquid food filling and comply with hygiene regulations.
Chemical decarbonization process
Designed specifically for LVP/SP steam systems, the built-in activated carbon filter element efficiently adsorbs carbon dioxide, ensures the purity of chemical media, and is suitable for flammable and explosive scenarios.
Drinking water terminal purification
As the terminal equipment of the water plant, it is equipped with a membrane filter element to achieve micron-level filtration, eliminate colloid residues, and improve the taste and transparency of drinking water.
Steam/gas refining
In thermal power plants and semiconductor fields, high-temperature resistant metal filter elements effectively filter high-temperature steam and corrosive gases to protect the safe operation of precision equipment.
Parameters
Maximum Pressure: 150Psi;
Polished or sandblasted external surface;
One sewage port.
|
Model |
Inlet/Outlet |
Flowrate |
Material |
Feet type |
|
BFL-1*1.5MM |
2" Female Thread |
15m³/h |
SS304/316 |
Movable Feet |
|
BFL-2*1.5MM |
2" Female Thread |
30m³/h |
SS304/316 |
Movable Feet |
|
BFL-1*1.2MM |
2" Female Thread |
15m³/h |
SS304/316 |
Fixed Feet |
|
BFL-2*1.2MM |
2" Female Thread |
30m³/h |
SS304/316 |
Fixed Feet |
|
BFH-1*1.5MM |
2" Female Thread |
15m³/h |
SS304/316 |
Movable Feet |
|
BFH-2*1.5MM |
2" Female Thread |
30m³/h |
SS304/316 |
Movable Feet |
|
1: #1BAG, 2: #2BAG |
||||
Maximum Pressure: 150Psi
Polished or sandblasted external surface.
One sewage port.
|
Model |
Size |
Inlet/Outlet |
Flowrate |
Material |
|
BFM-2 |
Ø400*2bags*2.5mm |
DN80 Flange |
60m³/h |
SS304/316 |
|
BFM-3 |
Ø450*3bags*2.5mm |
DN100 Flange |
90m³/h |
SS304/316 |
|
BFM-4 |
Ø550*4bags*3.0mm |
DN100 Flange |
120m³/h |
SS304/316 |
|
BFM-5 |
Ø600*5bags*3.0mm |
DN125 Flange |
150m³/h |
SS304/316 |
|
BFM-6 |
Ø650*6bags*3.0mm |
DN125 Flange |
180m³/h |
SS304/316 |
|
BFM-7 |
Ø700*7bags*3.0mm |
DN150 Flange |
210m³/h |
SS304/316 |
|
BFM-8 |
Ø800*8bags*3.0mm |
DN200 Flange |
240m³/h |
SS304/316 |
|
BFM-9 |
Ø850*9bags*3.0mm |
DN200 Flange |
270m³/h |
SS304/316 |
|
BFM-10 |
Ø900*10bags*3.0mm |
DN200 Flange |
300m³/h |
SS304/316 |
|
#2 BAG |
||||
Maximum Pressure: 150Psi
Polished or sandblasted external surface.
One sewage port.
|
Model |
Size |
Inlet/Outlet |
Flowrate |
Material |
|
MG3B-2 |
Ø400*2bags*2.0mm |
DN80 Flange |
60m³/h |
SS304/316 |
|
MG3B-3 |
Ø450*3bags*2.5mm |
DN100 Flange |
90m³/h |
SS304/316 |
|
MG3B-4 |
Ø500*4bags*2.5mm |
DN100 Flange |
120m³/h |
SS304/316 |
|
MG3B-5 |
Ø550*5bags*2.5mm |
DN125 Flange |
150m³/h |
SS304/316 |
|
MG3B-6 |
Ø600*6bags*3.0mm |
DN125 Flange |
180m³/h |
SS304/316 |
|
MG3B-7 |
Ø650*7bags*3.0mm |
DN150 Flange |
210m³/h |
SS304/316 |
|
MG3B-8 |
Ø700*8bags*3.0mm |
DN150 Flange |
240m³/h |
SS304/316 |
|
MG3B-9 |
Ø750*9bags*3.0mm |
DN200 Flange |
270m³/h |
SS304/316 |
|
MG3B-10 |
Ø800*10bags*3.0mm |
DN200 Flange |
300m³/h |
SS304/316 |
|
MG3B-12 |
Ø850*12bags*3.0mm |
DN200 Flange |
360m³/h |
SS304/316 |
|
MG3B-14 |
Ø900*14bags*4.0mm |
DN250 Flange |
420m³/h |
SS304/316 |
|
MG3B-18 |
Ø1000*18bags*4.0mm |
DN250 Flange |
540m³/h |
SS304/316 |
|
#2BAG, ≥7 bags of filter, it is recommended to add a rocker arm |
||||
|
Model |
Size |
Inlet/Outlet |
Pressure |
Thickness |
|
MG2/MG3/MG6 |
170*3cores*10" |
DN25 |
0.8MPA |
1.2/1.5 |
|
MG3/MG6 |
170*3cores*20" |
DN25 |
0.8MPA |
1.2/1.5 |
|
MG3/MG6 |
170*3cores*30" |
DN25 |
0.8MPA |
1.2/1.5 |
|
MG2/MG3/MG6 |
170*3cores*40" |
DN25 |
0.8MPA |
1.2/1.5 |
|
MG2/MG3/MG6 |
200*5cores*10" |
DN25 |
0.8MPA |
1.2/1.5 |
|
MG2/MG3/MG6 |
200*5cores*20" |
DN25/DN40 |
0.8MPA |
1.2/1.5 |
|
MG2/MG3/MG6 |
200*5cores*30" |
DN25/DN40 |
0.8MPA |
1.2/1.5 |
|
MG2/MG3/MG6 |
200*5cores*40" |
DN25/DN40 |
0.8MPA |
1.2/1.5 |
|
MG2/MG3/MG6 |
230*7cores*20" |
DN50 |
0.8MPA |
1.2/1.5 |
|
MG2/MG3/MG6 |
230*7cores*30" |
DN50 |
0.8MPA |
1.2/1.5 |
|
MG2/MG3/MG6 |
230*7cores*40" |
DN50 |
0.8MPA |
1.2/1.5 |
|
#2BAG, ≥7 bags of filter, it is recommended to add a rocker arm |
||||
|
Model |
Size |
Inlet/Outlet |
Sewage outlet |
Exhaust vent |
Thickness |
|
MG3/4/5/6 |
Ø300*10cores*40" |
2"F |
1/2"F |
1/4" F |
1.5 |
|
MG3/4/5/6 |
Ø300*12cores*30" |
2"F |
1/2"F |
1/4" F |
1.5 |
|
MG3/4/5/6 |
Ø300*12cores*40" |
2"F |
1/2"F |
1/4" F |
1.5 |
|
MG3/4/5/6 |
Ø350*15cores*30" |
DN65 Flange |
1/2"F |
1/4" F |
2.0 |
|
MG3/4/5/6 |
Ø350*15cores*40" |
DN65 Flange |
1/2"F |
1/4" F |
2.0 |
|
MG3/4/5/6 |
Ø400*20cores*30" |
DN80 Flange |
3/4"F |
1/4" F |
2.0 |
|
MG3/4/5/6 |
Ø400*20cores*40" |
DN80 Flange |
3/4"F |
1/4" F |
2.0 |
|
MG3/4/5/6 |
Ø450*27cores*30" |
DN80 Flange |
3/4"F |
1/4" F |
2.0 |
|
MG3/4/5/6 |
Ø450*27cores*40" |
DN80 Flange |
3/4"F |
1/4" F |
2.0 |
|
MG3/4/5/6 |
Ø500*30cores*30" |
DN80 Flange |
3/4"F |
1/4" F |
3.0 |
|
MG3/4/5/6 |
Ø500*30cores*40" |
DN80 Flange |
3/4"F |
1/4" F |
3.0 |
|
MG3/4/5/6 |
Ø550*36cores*40" |
DN100 Flange |
3/4"F |
1/4" F |
3.0 |
|
MG3/4/5/6 |
Ø600*40cores*40" |
DN100 Flange |
3/4"F |
1/4" F |
3.0 |
|
MG3/4/5/6 |
Ø650*50cores*40" |
DN125 Flange |
3/4"F |
1/4" F |
3.0 |
|
MG3/4/5/6 |
Ø700*60cores*40" |
DN125 Flange |
3/4"F |
1/4" F |
3.0 |
|
MG3/4/5/6 |
Ø750*75cores*40" |
DN125 Flange |
3/4"F |
1/4" F |
3.0 |
|
MG3/4/5/6 |
Ø800*80cores*40" |
DN150 Flange |
3/4"F |
1/4" F |
3.0, Thickened Flange |
|
MG3/4/5/6 |
Ø900*100cores*40" |
DN150 Flange |
3/4"F |
1/4" F |
3.0, Thickened Flange |
|
Model |
Size |
Top Port |
Pressure |
Thickness |
|
817 |
Φ200*900 |
2.5" |
0.8MPA |
1.5 |
|
835 |
Φ200*900 |
2.5" |
0.8MPA |
1.5 |
|
844 |
Φ200*1100 |
2.5" |
0.8MPA |
1.5 |
|
1035 |
Φ250*900 |
2.5" |
0.8MPA |
1.5 |
|
1044 |
Φ250*1100 |
2.5" |
0.8MPA |
1.5 |
|
1054 |
Φ250*1400 |
2.5" |
0.8MPA |
1.5 |
|
1254 |
Φ300*1400 |
2.5" |
0.8MPA |
1.5 |
|
1265 |
Φ300*1650 |
2.5" |
0.8MPA |
1.5 |
|
1465 |
Φ350*1650 |
2.5" |
0.8MPA |
1.5 |
|
1665 |
Φ400*1650 |
2.5" |
0.8MPA |
1.5 |
Hot Tags: filter housing, China filter housing manufacturers, suppliers, factory, Air Suspension Blower, Filter Housing, Cyclone Aerator, , reverse osmosis membrane
